ar0820w0010a

Remove/install energy management control unit

Type ar · topic 08.20 · version 0100 · 2011-01-10

Applies to: ENGINES 924.9 in MODEL 970 with CODE (MY5) BlueTEC HYBRID

Where it sits

Function group 1 Engine › 08 Electric drive, hybrid drive › 08.20 Control units/modules — Series 970

EinPAS 16 Fuel/power supply to engine › 16.20 High-voltage on-board electrical system › 16.20.11 Control unit/relay — Series 970

Also applies to engines/gearboxes: 924 9**

AR08.20-W-0010A

Remove/install energy management control unit

14.12.10

ENGINES 924.9 in MODEL 970 with CODE (MY5) BlueTEC HYBRID

Remove/install energy management control unit

W08.20-1000-06

1 Rubber plug

2 Bolt

3 Electrical connector

4 Bolt

A134 Energy management control unit

Remove/install

1

Switch off ignition

2

Remove stowage compartment from center module

Vehicles with code (FN1) Distributor vehicle cockpit

AR68.10-W-1624A

Vehicles with code (FN2) Comfort cockpit

AR68.10-W-1624B

Vehicles with code (FN3) Long-distance haulage vehicle cockpit

AR68.10-W-1624C

3

Remove bolts (4)

4

Disconnect electrical connectors (3) on energy management control unit (A134)

5

Remove screws (2) and energy management control unit (A134)

Installation: Ensure correct seating of the rubber plug (1) in the energy management control unit (A134).

*BA08.20-N-1003-01A

6

Install in the reverse order

Control units

Number

Designation

Engine
924.9

BA08.20-N-1003-01A

Bolt, energy management to bracket

M6

Nm

7

Referenced documents