ar0761p1401mre

Remove/install throttle valve actuator

Type ar · topic 07.61 · version 0100 · 2015-11-19

Applies to: Engine 274 in model 172

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.61 ME fuel injection/ ignition system — Series 172

EinPAS 15 Engine › 15.45 Engine management › 15.45.31 Actuator motor/actuator/mixture controller — Series 172

Also applies to engines/gearboxes: 274 ***

AR07.61-P-1401MRE

Remove/install throttle valve actuator

5.11.15

Engine

274 in model 172

Remove/install throttle valve actuator

1

Charge air cooler

3

Screw/bolts

M16/6

Throttle valve actuator

P07.61-3868-06

Remove/install

1

Remove upper engine cover

2

Remove charge air cooler (1) and place with attached lines and hoses to one side

AR09.41-P-6817MRE

3

Disconnect electrical connection at throttle valve actuator (M16/6)

4

Remove screws/bolts (3) on throttle valve actuator (M16/6)

Installation: Tighten screw/bolts (3) in diagonally opposite sequence.

Bolt, throttle valve actuator to charge air distributor

*BA30.20-P-1002-01C

5

Remove throttle valve actuator (M16/6)

Installation: Replace seals. Ensure correct seating of the seals.

6

Install in the reverse order

7

Read out fault memory using the diagnostic system and clear if necessary

AD00.00-P-2000-04A

Electronic accelerator actuator

Number

Designation

Engine 274

BA30.20-P-1002-01C

Bolt, throttle valve actuator to charge air distributor

Nm

6

Referenced documents