ar0761p1401mr

Remove/install throttle valve actuator

Type ar · topic 07.61 · version 0104 · 2015-11-23

Applies to: Engine 274 in model 204, 207

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.61 ME fuel injection/ ignition system — Series 204 · Series 207

EinPAS 15 Engine › 15.45 Engine management › 15.45.31 Actuator motor/actuator/mixture controller — Series 204 · Series 207

Also applies to engines/gearboxes: 274 ***

AR07.61-P-1401MR

Remove/install throttle valve actuator

5.11.15

Engine

274 in model 204, 207

Remove/install throttle valve actuator

1s

Screw/bolts

2

Sealing rings

M16/6

Throttle valve actuator

P07.61-3829-06

Remove/install

1

Remove engine air intake duct upstream of air filter

2

Remove screw/bolts (1s)

Installation: Tighten screw/bolts (1s) in diagonally opposite sequence.

Bolt, throttle valve actuator to charge air distributor

*BA30.20-P-1002-01C

3

Remove throttle valve actuator (M16/6)

Installation: Replace seals (2). Make sure that seals (2) are seated properly.

4

Unclip electrical line on throttle valve actuator (M16/6) and disconnect electrical connection

5

Install in the reverse order

6

Read out fault memory using the diagnostic system and clear if necessary

AD00.00-P-2000-04A

Electronic accelerator actuator

Number

Designation

Engine 274

BA30.20-P-1002-01C

Bolt, throttle valve actuator to charge air distributor

Nm

6

Referenced documents