Remove/install throttle valve actuator · ar0761p1401ak · Mercedes-Benz WIS

AR07.61-P-1401AK

Remove/install throttle valve actuator

23.4.08

ENGINES 266.920 /940 /960 in MODEL 169.0 /3, 245.2

P07.61-3214-06

Illustrated on model 169.0

1 Electrical connector

2 Retaining clip

3 Bolts

4 Connection fitting

5 Crankcase ventilation

M16/6 Throttle valve actuator

P07.54-2074-01

Shown on model 245 with code 924 Bivalent natural gas drive

1 Electrical connector

2 Retaining clip

3a Bolts

3b Bolts

4 Connection fitting

5 Crankcase ventilation

6 Screw

7 Bracket

M16/6 Throttle valve actuator

 	Remove/install
1	Remove air filter		AR09.10-P-1050AK
2	Remove bolts (3a, 6) and remove bracket (7)	Vehicles with code 924 Bivalent natural gas drive
			*BA07.04-P-1001-01I
			*BA07.04-P-1007-01I
3	Remove bolts (3 or 3b)		*BA07.04-P-1001-01I
4	Disconnect electrical connector (1) on throttle valve actuator (M16/6) and unclip wiring harness from retaining clip (2)
5	Pull crankcase ventilation (5) with connection fitting (4) off cylinder head cover
6	Remove throttle actuator (M16/6)	 Installation: Replace both seals for throttle valve actuator (M16/6).
7	Install in the reverse order
8	Perform default initialization of throttle valve actuator (M16/6) to ME-SFI [ME] control unit using STAR DIAGNOSIS	Only when replacing the throttle valve actuator (M16/6).
9	Connect STAR DIAGNOSIS, read out fault memory and erase if necessary

 Electronic accelerator pedal actuator

Number	Designation		Engine 266


BA07.04-P-1001-01I	Bolt, throttle valve actuator to intake manifold	Nm	10
BA07.04-P-1007-01I	Bolt from air intake connection bracket to throttle valve actuator bracket	Nm	9