Remove/install charge air temperature sensor

Type ar · topic 07.52 · version 0100 · 2010-11-12

Applies to: ENGINES 157, 278 in MODEL 216, 221

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.52 PEC-SFI fuel injection/ignition system — Series 216 · Series 221

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 216 · Series 221

Also applies to engines/gearboxes: 157 ***, 278 ***

AR07.52-P-1466MMB

Remove/install charge air temperature sensor

27.10.10

ENGINES 157, 278 in MODEL 216, 221

P07.52-2037-06

1 Intake manifold

2 Charge air cooler

3 Electrical line

B17/8 Charge air temperature sensor

 	Remove/install
1	Remove intake manifold (1)		AR09.20-P-1310MMB
2	Disconnect electrical line (3) at charge air temperature sensor (B17/8)
3	Remove charge air temperature sensor (B17/8)	 Installation: Check for correct seating of sealing ring between charge air temperature sensor (B17/8) and charge air cooler (2).
4	Install in the reverse order