Remove/install charge air temperature sensor

Type ar · topic 07.52 · version 0100 · 2011-08-05

Applies to: ENGINES 157, 278 in MODEL 212, 218 ENGINES 278 in MODEL 207

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.52 PEC-SFI fuel injection/ignition system — Series 207 · Series 212 · Series 218

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 207 · Series 212 · Series 218

Also applies to engines/gearboxes: 157 ***, 278 ***

AR07.52-P-1466ELB

Remove/install charge air temperature sensor

27.7.11

ENGINES 157, 278 in MODEL 212, 218

ENGINES 278 in MODEL 207

P07.52-2037-06

Illustrated on model 218.373

1 Intake manifold

2 Charge air cooler

3 Electrical line

B17/8 Charge air temperature sensor

 	Remove/install
1	Remove intake manifold (1)		AR09.20-P-1310ELB
2	Disconnect electrical line (3) from charge air temperature sensor (B17/8)
3	Remove charge air temperature sensor (B17/8)	 Installation: Check for correct seating of sealing ring between charge air temperature sensor (B17/8) and charge air cooler (2).
4	Install in the reverse order