Remove/install charge air temperature sensor

Type ar · topic 07.52 · version 0100 · 2005-06-09

Applies to: ENGINE 266.980 in MODELS 169.0 /3, 245.2

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.52 PEC-SFI fuel injection/ignition system — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 169 (models 0**, 3**) · Series 245 (models 2**)

Also applies to engines/gearboxes: 266 980

AR07.52-P-1466BK

Remove/install charge air temperature sensor

11.4.05

ENGINE 266.980 in MODELS 169.0 /3, 245.2

P07.52-2025-04

Shown on model 245.2

1 Electrical connector

2 Charge air distribution pipe

B17/8 Charge air temperature sensor

 	Remove/install
1	Remove engine trim panel		AR01.10-P-2405BK
2	Disconnect electrical connector (1) at charge air temperature sensor (B17/8)
3	Unclip charge air temperature sensor (B17/8) at the charge air distribution pipe (2) (arrows) and remove.	 Installation: Replace the sealing ring at the charge air temperature sensor (B17/8).
4	Install in the reverse order