ar0752p1465pi

Remove/install intake air temperature sensor

Type ar · topic 07.52 · version 0101 · 2005-04-06

Applies to: ENGINE 642 in MODEL 203, 209

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.52 PEC-SFI fuel injection/ignition system — Series 203 · Series 209

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 203 · Series 209

Also applies to engines/gearboxes: 642 ***

AR07.52-P-1465PI

Remove/install intake air temperature sensor

28.9.04

ENGINE 642 in MODEL 203, 209

Remove/install intake air temperature sensor

1 Engine intake air duct downstream of air filter

2 Air filter housing

B2/6 Left hot film MAF sensor

B2/7 Right hot film MAF sensor

P09.00-2061-03

Remove/Install

1

Remove engine cover

AR01.10-P-2405PI

2

Remove right air filter housing (2)

AR09.10-P-1150PI

3

Remove engine intake air duct downstream of air filter (1)

The intake air temperature sensors are located in the hot film MAF sensor, left (B2/6) and the hot film MAF sensor, right (B2/7).

AR09.10-P-8130PI

Installation: The hot film MAF sensor, left (B2/6) and the hot film MAF sensor, right (B2/7) must be completely replaced in the event of a defect, along with the engine intake air duct downstream of the air filter (1).

4

Install in the reverse order

Referenced documents