ar0752p1465ak

Remove/install intake air temperature sensor

Type ar · topic 07.52 · version 0101 · 2005-06-09

Applies to: ENGINE 266.920 /940 /960 in MODEL 169.0 /3, 245.2

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.52 PEC-SFI fuel injection/ignition system — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 169 (models 0**, 3**) · Series 245 (models 2**)

Also applies to engines/gearboxes: 266 920, 266 940, 266 960

AR07.52-P-1465AK

Remove/install intake air temperature sensor

9.3.04

ENGINE 266.920 /940 /960 in MODEL 169.0 /3, 245.2

Remove/install intake air temperature sensor

P07.52-2022-05

Shown on model 169.0

1 Intake manifold

2 Electrical connector

B17 Intake air temperature sensor

Remove/install

1

Remove air filter housing

AR09.10-P-1050AK

2

Separate electrical connector (2) at intake air temperature sensor (B17)

Installation: Ensure that electrical connector (2) is seated correctly.

3

Unclip intake air temperature sensor (B17) at the intake manifold (1) (arrows) and remove

Installation: Replace the sealing ring at the coolant intake air temperature sensor (B17).

4

Install in the reverse order

Referenced documents