ar0751p1403mnl

Remove/install right throttle valve actuator

Type ar · topic 07.51 · version 0100 · 2017-11-14

Applies to: Engine 176 in model 217, 222

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.51 HFM-SFI fuel injection/ignition system — Series 176 · Series 217 · Series 222

EinPAS 15 Engine › 15.45 Engine management › 15.45.31 Actuator motor/actuator/mixture controller — Series 176 · Series 217 · Series 222

AR07.51-P-1403MNL

Remove/install right throttle valve actuator

25.07.2017

Engine

176 in model 217, 222

Remove/install right throttle valve actuator

P09.41-2987-08

3

Right charge air cooler

M16/61

Right throttle valve actuator

4

Bolts

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1

Remove right charge air cooler (3)

AR09.41-P-6828MNL

2

Remove screws (4) and right throttle valve actuator (M16/61) from right charge air cooler (3)

Installation: Replace seal.

Bolt, throttle valve actuator to charge air cooler

*BA09.41-P-1008-01X

3

Install in the reverse order

Charge air line/charge air cooling

Number

Designation

Engine 176

BA09.41-P-1008-01X

Bolt, throttle valve actuator to charge air cooler

Nm

9

Referenced documents