ar0741p1453e
Removing and installing hot wire mass air flow sensor
Type ar · topic 07.41 · version 0103 · 2006-07-26
Applies to: ENGINE 119.97
Where it sits
Function group 1 Engine › 07 Mixture formation › 07.41 LH sequential multiport fuel injection system
EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness
Also applies to engines/gearboxes: 119 97*
AR07.41-P-1453E
| Removing and installing hot wire mass air flow sensor
| 13.7.94
|
ENGINE 119.97
31 Connection hose
32 Hose clamp
B2/2 Hot wire mass air flow sensor
Arrow Installation lug
Item illustration, etc.
| Working notes
|
|
|
Installation
| Connector for hot wire mass air flow sensor (B2/2)
| Tighten union nut until it catches
|
|
31
| Connection hose
| Replace if necessary
|
|
|
|
| Observe installation position(arrow) of connection hose/hot wire mass air flow sensor (B2/2)
|
|
32
| Hose clamp
| Loosen, tighten, for this purpose remove vacuum line for brake unit
| *WH58.30-Z-1002-06A
|
Commercially available tools
Number
| Designation
|
|
WH58.30-Z-1002-06A
| 7 mm socket hexagon on flexible shaft for hose clamps with worm drive
|
|
