AR07.17-S-7002SD | Remove/install pressure transducer for boost pressure control | 8.4.10 |
ENGINES 646.982 /983 in MODEL 639.601 /603 /605 /701 /703 /705
ENGINES 646.982 in MODEL 639.711 /713 /811 /813 /815
S07.17-4502-04
1 Vacuum hoses
2 Nut
3 Nut
Y77/1 Boost pressure control pressure transducer
| Remove/install | ||
| Notes on self-locking nuts and bolts | ||
1 | Remove vacuum hoses (1) | Installation: Ensure that the vacuum hoses (1) are seated correctly and do not chafe or touch anything. | |
2 | Unplug electrical connector at boost pressure control pressure transducer (Y77/1). | ||
3 | Unscrew nut (2) | ||
4 | Loosen nut (3) | ||
5 | Remove boost pressure control pressure transducer (Y77/1) | Remove boost pressure control pressure transducer (Y77/1) upwards out of bracket. | |
Installation: Ensure that the boost pressure control pressure transducer (Y77/1) is seated correctly and does not chafe or touch anything. | |||
6 | Install in the reverse order |
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts