AR07.17-P-1450SM | Removing/installing the diaphragm pressure regulator | 27.11.02 |
ENGINE 160.910 in MODELS 450.3 /4
up to WME01MC012H106037
ENGINE 160.920 in MODELS 450.3 /4 (except 450.418)
from WME4503001J000001
P07.17-2047-01
1 Vacuum line
2 Retaining clamp
3 Fuel distributor
4 Fuel diaphragm pressure regulator
| Removing/installing | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Remove engine compartment cover | See Operator's Manual | |
2 | Remove retaining clamp (2) | ||
3 | Detach vacuum line (1) on fuel diaphragm pressure regulator (4) | ||
4 | Pull fuel diaphragm pressure regulator (4) out of the fuel distributor (3) | The fuel distributor (3) is under pressure. | |
Installation: Replace sealing rings on fuel diaphragm pressure regulator (4) and wet with silicone-free oil. | |||
5 | Install in reverse order |
Referenced documents
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.