ar0716w100701h

Fill fuel low-pressure circuit on engine with hand pump

Type ar · topic 07.16 · version 0103 · 2015-12-09

Applies to: Engine 471.9## ## up to 032690

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.16 Diesel injection system common rail — Series 471 (models 9**)

EinPAS 16 Fuel/power supply to engine › 16.10 Fuel supply › 16.10.1 Basic information — Series 471 (models 9**)

AR07.16-W-1007-01H

Fill fuel low-pressure circuit on engine with hand pump

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Engine

471.9## ## up to 032690

Fill fuel low-pressure circuit on engine with hand pump

1

Actuate manual delivery pump (2) on fuel filter module (1) with about 400 rapid pump strokes of about 3 minute until a noticeable pressure is present at the manual delivery pump (2).



2

Start engine within about 5 s at the engine start and engine stop button and allow to run in idle, then subsequently allow engine to run at higher engine speeds.


If the engine does not start or does not achieve an increased motor rpm, repeat operation step 1.



3

Switch off engine.


W07.16-1095-11

Referenced documents