Series
en
ar0715b162802a
Separate, connect plug connection of engine wiring harness at MR/PLD control
module
Type ar · topic 07.15 · version 0101 · 2017-06-12
Applies to: Engine 457.9 in model 382.15, 634.0 Engine 457.9 in model 934.241/251, 958.4 Engine 460.984 in model 934.241/251, 938.142 Engine 904.9, 906.9, 924.9, 926.9 in model 368, 382.17/18, 384.06/07, 634.0, 685.282/284/289/290, 979.2
Where it sits
Function group 1 Engine › 07 Mixture formation › 07.15 Diesel injection system (PLN), Engine control (MR) — Series 368 · Series 382 (models 15*, 17*, 18*) · Series 384 (models 06*, 07*) · Series 460 (models 984) · Series 634 (models 0**) · Series 685 (models 282, 284, 289, 290) · Series 904 (models 9**) · Series 906 (models 9**) · Series 934 (models 241, 251) · Series 938 (models 142) · Series 958 (models 4**) · Series 979 (models 2**)
EinPAS 25 On-board/network/multifunction › 25.25 Main wiring harness › 25.25.20 Engine wiring harness — Series 368 · Series 382 (models 15*, 17*, 18*) · Series 384 (models 06*, 07*) · Series 460 (models 984) · Series 634 (models 0**) · Series 685 (models 282, 284, 289, 290) · Series 904 (models 9**) · Series 906 (models 9**) · Series 934 (models 241, 251) · Series 938 (models 142) · Series 958 (models 4**) · Series 979 (models 2**)
Also applies to engines/gearboxes: 457 9**, 924 9**, 926 9**
AR07.15-B-1628-02A
Separate, connect plug connection of engine wiring harness at MR/PLD control module
Engine 457.9, 904.9, 906.9, 924.9, 926.9
Engine
457.9 in model 382.15, 634.0
Engine
457.9 in model 934.241/251, 958.4
Engine
460.984 in model 934.241/251, 938.142
Engine
904.9, 906.9, 924.9, 926.9 in model 368, 382.17/18, 384.06/07, 634.0, 685.282/284/289/290, 979.2
When disconnecting or connecting the engine electric wires on the control unit, the vehicle contact key must be in the OFF position.
1
On 900 series motors, cut the plastic clips and separate the motor cables from the support (4).
Position the electrical cables on the support (4) and fix them with new plastic clips.
2
Pull the safety lock handle (3) out of the socket (1) of the engine electric cables and disconnect it from the control unit (A6).
Connect the socket (1) of engine electrical cables in the control unit (A6) and push the safety lock handle (3).
