G07.13-3113-05
50/6 Nozzle disk
51 Injection nozzle
51/16 Bracket
55 Injection line
56 Anti-twist lock
90/3 Fuel leak hoses
L9 Needle motion sensor connector
| Remove/Install | ||
1 | Detach fuel leak hoses (90/3) | ||
2 | Unscrew injection lines (55) from injection nozzles | Disconnect needle motion sensor (L9) from no.1 cylinder. | |
| |||
3 | Unscrew bracket (51/16) with anti-twist lock and remove injection nozzles (51) | Installation: Insert injection nozzles with special grease. Replace bracket (51/16) and nozzle disk (50/6). | |
| |||
4 | Install in the reverse order |
Injection nozzles, injection valves, lines
Number | Designation | Engine | ||
BA07.03-N-1001-01E | Injection line | Nm | 27 | |
BA07.03-N-1002-01E | Injection nozzles | 1st stage | Nm | 7 |
2nd stage | ° | 180 | ||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1036-06A | Special grease | A 001 989 42 51 10 |