ar0713d841002a

Basic setting of distributor-type injection pump

Type ar · topic 07.13 · version 0103 · 1999-07-08

Applies to: ENGINE 602.980 in MODEL 901, 902, 903, 904

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.13 Diesel injection system distributor pump (DFI, EDC) — Series 602 (models 980) · Series 901 · Series 902 · Series 903 · Series 904

EinPAS 15 Engine › 15.45 Engine management › 15.45.51 Injection pump/injection timer — Series 602 (models 980) · Series 901 · Series 902 · Series 903 · Series 904

AR07.13-D-8410-02A

Basic setting of distributor-type injection pump

Basic setting of distributor-type injection pump

D07.13-0081-01

1 Check position of engine. 12° before ignition TDC of cylinder 1, correct if necessary.

Basic setting of distributor-type injection pump

D07.13-0082-01

2 Rotate injection pump shaft so that the marking (gap) in the teeth of the driver faces toward the connection of the injection pipe for cylinder 1.
After this, turn injection pump shaft to the right as far as the pressure point and push coupling sleeve onto the driver.