ar0708s7008cd

Remove/install injection system control unit

Type ar · topic 07.08 · version 0200 · 2019-01-02

Applies to: Model 415 with engine 200, 607, 608

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.08 Governor — Series 415

EinPAS 15 Engine › 15.45 Engine management › 15.45.11 Control unit/relay — Series 415

Also applies to engines/gearboxes: 200 ***, 607 ***, 608 ***

AR07.08-S-7008CD

Remove/install injection system control unit

13.12.2018

Model

415 with engine 200, 607, 608

Modification notes

14.12.2018

Method extended

Operation steps 1, 5, 6

Remove/install injection system control unit

1

Electrical connectors

N3/9

CDI control unit (with engine 607, 608)

N3/10

ME-SFI [ME] control unit (with engine 200)

S07.08-4502-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Connect vehicle diagnosis system and begin commissioning of the CDI control unit (N3/9) or ME-SFI control unit (N3/10).

When installing new CDI control unit (N3/9) or ME-SFI control unit (N3/10).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04C

Installation: Transfer stored data into the new CDI control unit (N3/9) or the new ME-SFI control unit (N3/10).

2

Remove battery box.

AR54.10-S-1225C

3

Remove CDI control unit (N3/9) or ME-SFI control unit (N3/10) with the bracket.

4

Disconnect electrical connectors (1).

5

Remove CDI control unit (N3/9) or ME-SFI control unit (N3/10) with the bracket.

To do this, remove electrical wiring harness from the bracket.

Installation: Check retaining clips of the electrical wiring harness for damage.

Depending on the findings,

replace damaged retaining clips of the electrical wiring harness.

6

Change bracket.

When installing new CDI control unit (N3/9) or ME-SFI control unit (N3/10).

7

Install in the reverse order.

Referenced documents