ar0707p1454tj

Removing/installing the hot film mass air flow sensor together with air intake pipe

Type ar · topic 07.07 · version 0100 · 2005-08-04

Applies to: ENGINE 629 in MODEL 211

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.07 Air volume guage, air mass guage — Series 211 · Series 629

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 211 · Series 629

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 211 · Series 629

AR07.07-P-1454TJ

Removing/installing the hot film mass air flow sensor together with air intake pipe

1.3.05

ENGINE 629 in MODEL 211

Removing/installing the hot film mass air flow sensor together with air intake pipe

P07.04-2454-11

1 Clamps

2 Air intake pipes

3 Air intake ducts

4 Electrical connectors

B2/6 Left hot film MAF sensor

B2/7 Right hot film MAF sensor

Removing/installing

1

Switch off ignition

Vehicles with Keyless-Go Code 889: Press Start/Stop button repeatedly until ignition is switched off.

2

Remove air filter housing

AR09.10-P-1150TJ

3

Loosen clamps (1)

4

Detach air intake pipe (2) with left hot film mass air flow sensor (B2/6) and right hot film MAF sensor (B2/7) from air intake ducts (3)

Installation: Align the markings on the air intake pipe (2) and the air intake ducts (3) together.

5

Disconnect electrical connectors (4) on left mass air flow sensor (B2/6) and right hot film MAF sensor (B2/7)

6

Remove air intake pipes (2) with left mass air flow sensor (B2/6) and right hot film MAF sensor (B2/7)

7

Install in reverse order

Referenced documents