Remove hot film mass air flow sensor together with air intake pipe, install

Type ar · topic 07.07 · version 0100 · 2003-02-25

Applies to: ENGINE 612.990 in MODEL 203.018 /218 /718

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.07 Air volume guage, air mass guage — Series 203 (models 018, 218, 718)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 203 (models 018, 218, 718)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 203 (models 018, 218, 718)

Also applies to engines/gearboxes: 612 990

AR07.07-P-1454PF

Remove hot film mass air flow sensor together with air intake pipe, install

15.1.03

ENGINE 612.990 in MODEL 203.018 /218 /718

P07.07-2037-11

1 Connector

2 Connector

3 Bolt

B2/5 Hot film mass air flow sensor

B28/5 Pressure sensor downstream of air cleaner

 	Remove/Install
1	Unplug connectors (1) at hot film mass air flow sensor (B2/5)
2	Unplug connector (2) at pressure sensor downstream of air cleaner (B28/5)
3	Remove air cleaner		AR09.10-P-1050C
4	Remove hot film mass air flow sensor (B2/5)	 Unscrew screws (3) out of the air filter housing.
5	Install in the reverse order