Remove hot film mass air flow sensor together with air intake pipe, install

Type ar · topic 07.07 · version 0101 · 2003-04-17

Applies to: ENGINE 628.962 in MODEL 463.309 /332 /333

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.07 Air volume guage, air mass guage — Series 463 (models 309, 332, 333) · Series 628 (models 962)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 463 (models 309, 332, 333) · Series 628 (models 962)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 463 (models 309, 332, 333) · Series 628 (models 962)

AR07.07-P-1454GD

Remove hot film mass air flow sensor together with air intake pipe, install

5.10.00

ENGINE 628.962 in MODEL 463.309 /332 /333

P07.07-2024-06

1 Hose clamp

2 Left air intake pipe

3 Connector

4 Hose clamp

5 Right air intake tube

B2/6 Hot film mass air flow sensor left

B2/7 Hot film mass air flow sensor right

 	Remove/Install
1	Remove air cleaner	AR09.10-P-1050GD
2	Separate plug connections (3) at hot film mass air flow sensor on left (B2/6) and on right (B2/7)
3	Slacken hose clamps (1, 4).
4	Detach left hot film mass air flow sensor (B2/6) and right (B2/7) together with left air intake pipe (2) and right (5)
5	Install in the reverse order