AR07.07-P-1453PK | Remove, install hot film mass air flow sensor | 4.5.00 |
ENGINE 111.955 in MODEL 203.045 /245 /745
P07.07-2021-09
1 Engine trim panels
2 Bolt
3 Left charge air line
4 Air scoop
5 O-ring
6 Connector of hot film mass air flow sensor
7 Hose clamp
8 Connection hose
9 Bolts
10 O-ring
B2/5 Hot film mass air flow sensor
| Removing, installing | ||
1 | Remove engine trim panels (1) | ||
2 | Unscrew bolts (2) of charge air line (3) | ||
3 | Detach air scoop (4) | Do not detach vacuum lines of air scoop (4). | |
Installation: Inspect O-ring (5) of air scoop (4), replace if necessary. | |||
| |||
4 | Unplug connector (6) of hot film mass air flow sensor (B2/5) | ||
5 | Loosen hose clamp (7) | ||
6 | Pull hot film mass air flow sensor (B2/5) out of connection hose (8) | ||
7 | Unscrew bolts (9) | ||
8 | Remove hot film mass air flow sensor (B2/5) | Installation: Inspect O-ring (10), replace if necessary. | |
9 | Install in the reverse order |
Electronic accelerator pedal actuator