Removing and installing throttle flap valve · ar0705b7004b · Mercedes-Benz WIS

AR07.05-B-7004B

Removing and installing throttle flap valve

12.02.16

Cumbustion engine 376.919 with Vehicle 382.068

B07.20-0006-11

1 Throttle valve set

1.1 Arrow indicating the flow direction

2 Bent tube

3 Clamp

4 Nuts

5 Bolts

6 Electric cables connector

7 Nuts

8 Bolts

9 Mixer flange

	Remove and install
Danger!	Safety measures to perform service works in gas engine		AS00.00-B-0015-01A
Danger!	Turn off the main switch or disconnect the negative battery cable
	Access for maintenance and repair work execution vary according to the body type/manufacturer	Refer to body maker instructions.
1	Disconnect the electric wires (6)
2	Remove the clamp (3)
3	Remove the nuts (4) and the bolts (5) and remove the curved tube (2)	Install: Clean the sealing surface between the curved tube (2) and the throttle valve (1) and put a sealing product on it. Replace the O-ring between the curved tube and the intake manifold.	*BR00.45-B-1011-01A
			*BA07.52-B-1004-01A
4	Remove the nuts (7) and the bolts (8) and remove the throttle valve set (1)	Install: Clean the sealing surface between the throttle valve (1) and the mixer flange (9) and put a sealing product on it.  The indicating arrow (1.1) must face the curved tube (2).	*BR00.45-B-1011-01A
			*BA07.52-B-1006-01A
5	Install in reverse order

Fuel distributor

Número	Denominação		376.919 Engine


BA07.52-B-1004-01A	Bent tube fastening to the throttle valve set	Nm	35
BA07.52-B-1006-01A	Throttle valve set in the manifold/mixer flange	Nm	35

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1011-01A	Sealing product - Loctite 574	A 001 989 89 20