ar0704s0100cb

Remove/install intake manifold pressure sensor

Type ar · topic 07.04 · version 0100 · 2013-04-30

Applies to: MODEL 415 with ENGINE 200

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 415

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 415

Also applies to engines/gearboxes: 200 ***

AR07.04-S-0100CB

Remove/install intake manifold pressure sensor

16.04.2013

MODEL

415 with ENGINE 200

Remove/install intake manifold pressure sensor

1

Electrical connection

2

Screw/bolt

B28/15

Intake manifold pressure sensor

S07.04-4541-04

Remove/install

1

Disconnect electrical connection (1)

2

Remove intake manifold pressure sensor (B28/15)

Remove screw/bolt (2) to do this.

Installation: Check sealing ring on intake manifold pressure sensor (B2815), replace if necessary.

3

Install in the reverse order

4

Connect STAR DIAGNOSIS, read out fault memory and clear if required

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04C

Referenced documents