1 | Electrical connector |
B50/5 | Fuel temperature sensor |
S07.04-4582-06
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger ! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
| Remove/install | ||
1 | Remove lower engine compartment paneling | ||
2 | Disconnect electrical connector (1) | ||
3 | Remove fuel temperature sensor (B50/5) | Fuel temperature sensor on high pressure pump | |
4 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- ar6120s1105e Remove/install lower engine compartment lining
- ar6120s1105e
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.