ar0704s0016cd

Remove/install exhaust gas recirculation high-pressure control temperature sensor

Type ar · topic 07.04 · version 0100 · 2015-06-16

Applies to: Model 415 with engine 607 with code MB6 (Low-emission vehicle, Euro 6 Gr. 1)

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 415

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Series 415

Also applies to engines/gearboxes: 607 ***

AR07.04-S-0016CD

Remove/install exhaust gas recirculation high-pressure control temperature sensor

3.6.15

Model

415 with engine 607

with code MB6 (Low-emission vehicle, Euro 6 Gr. 1)

Remove/install exhaust gas recirculation high-pressure control temperature      
	sensor

5

Air intake pipe

6

Screw/bolt

7

Screw/bolt

8

Crankcase ventilation hose

9

Bracket

10

Screw/bolt

11

Clamp

12

Gas recirculation hose

S07.04-4659-06

Remove/install exhaust gas recirculation high-pressure control temperature      
	sensor

1

Electrical connection

2

Bracket

3

Bracket

B16/14

High pressure exhaust gas recirculation temperature sensor

S07.04-4658-06

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Remove/install

1

Remove air filter housing

AR09.10-S-1150CD

2

Remove air intake hose

AR09.10-S-8130CD

3

Remove crankcase ventilation hose (8) from air intake pipe (5)

4

Remove screw/bolts (7)

5

Unfasten bracket (9)

To do this undo screw/bolt (10) by a few revolutions.

6

Remove screw/bolts (6)

7

Remove gas recirculation hose (12) from air intake pipe (5)

To do this unfasten clamp (11) and remove exhaust recirculation hose (12) from air intake pipe (5).

8

Remove air intake pipe (5)

Installation: Check seal of air intake pipe (5), inspect and, if necessary, replace.

9

Disconnect electrical connection (1)

10

remove electrical connection (1) from bracket (2)

11

Remove electrical wiring harness from bracket (3)

12

Remove high pressure EGR temperature sensor (B16/14)

Installation: B16Coat nut of high pressure EGR temperature sensor (14) with hot lubrication paste.

Nut, temperature sensor to EGR line

*BA07.04-N-1002-01J

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

13

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

14

Check leaktightness of exhaust system when engine is running

Visual inspection only.

Sensors, transmitters

Number

Designation

Engine 607 in model 415

BA07.04-N-1002-01J

Nut, temperature sensor to EGR line

Nm

32

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51

Referenced documents