S07.04-4706-09
1 | Union nut | 3 | Electrical connection | |
2 | Electrical line | B19/6 | Temperature sensor upstream of catalytic converter |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Raise vehicle | ||
2 | Remove electrical line (2) from retaining clamps | Installation: Check for a correct installation position. | |
3 | Disconnect electrical connection (3) | ||
4 | Remove temperature sensor upstream of catalytic converter (B19/6) | To do this unscrew union nut (1). | |
Installation: Coat thread of union nut (1) with heat-resistant lubricant. | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Temperature sensor upstream of catalytic converter | |||
5 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- ar0060s1000e Lift/jack up vehicle
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.