ar0704p0080cd

Remove/install O2 sensor

Type ar · topic 07.04 · version 0105 · 2012-05-08

Applies to: ENGINES 651 in MODELS 166, 172, 204, 207, 212, 218, 221

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

AR07.04-P-0080CD

Remove/install O2 sensor

23.4.12

ENGINES 651 in MODELS 166, 172, 204, 207, 212, 218, 221

Remove/install O2 sensor

P07.04-2650-08

1 Electrical connector

G3/2 Oxygen sensor upstream of catalytic converter

2 Mounting clip

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove cylinder head cover trim

2

Remove air filter housing

AR09.10-P-1150CD

3

Disconnect electrical connector (1)

4

Expose electrical wiring harness for oxygen sensor upstream of catalytic converter (G3/2)

The fastening clip (2) which is removed during removal must be put back in exactly the same position again during installation.

5

Remove oxygen sensor upstream of catalytic converter (G3/2)

Installation: Coat thread of oxygen sensor upstream of catalytic converter (G3/2) with heat-resistant lubricant.

*BA14.00-P-1001-01F

Hot lubricating paste

*BR00.45-Z-1005-06A

6

Install in the reverse order

7

Connect STAR DIAGNOSIS, read out fault memory and erase if required

Stored faults which may be caused by assembly work, test work, removed lines or a simulation, must be processed and erased in fault memories after completing the work.

AD00.00-P-2000-04A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Carry out an engine test run and check exhaust system for leaks

O2 sensor

Number

Designation

Engine
651

BA14.00-P-1001-01F

O2 sensor to catalytic converter

Nm

50

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DB supply specification 6879.20

A 000 989 76 51

Referenced documents