ar0704d2000tsr

Remove/install low-pressure fuel pressure sensor

Type ar · topic 07.04 · version 0100 · 2018-03-01

Applies to: Engine 651 in model 907

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 651 · Series 907

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 651 · Series 907

AR07.04-D-2000TSR

Remove/install low-pressure fuel pressure sensor

14.02.2018

Engine

651 in model 907

Remove/install low-pressure fuel pressure sensor

D07.04-1239-09

1

Fuel pressure sensor

2

Electrical connector

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Remove/install

1

Remove engine cover

AR01.10-D-2405TSR

2

Disconnect electrical connection (2)

3

Remove fuel pressure sensor (1)

Installation: Check sealing ring for damage.

Low pressure fuel pressure sensor to fuel line

*BA07.04-N-1011-02TSR

Depending on findings

Replace damaged sealing ring.

4

Install in the reverse order

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Check for leak tightness with engine running

Visual inspection only.

Sensors, probes

Number

Designation

Engine 651 in model 907

BA07.04-N-1011-02TSR

Low pressure fuel pressure sensor to fuel line

Nm

12

Referenced documents