ar0704d0040tsf

Remove/install exhaust pressure sensor

Type ar · topic 07.04 · version 0201 · 2018-03-14

Applies to: Engine 651 in model 910

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 651 · Series 910

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Series 651 · Series 910

AR07.04-D-0040TSF

Remove/install exhaust pressure sensor

13.03.2018

Engine

651 in model 910

Modification notes

27.02.2018

Special tool 129 589 00 91 00 set of stop plugs added

Step 4

27.02.2018

Method extended

Step 5

Remove/install exhaust pressure sensor

1

Electrical connector

2

Exhaust pressure sensor

D07.04-1231-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing, safety glasses and respiratory protection. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Disconnect electrical connection (1)

2

Remove exhaust pressure sensor (2)

Seal off opening.

Installation: Replace sealing ring.

Exhaust pressure sensor to exhaust gas recirculation pipe

*BA07.04-N-1006-02TSR

Record plug

*129589009100

3

Install in the reverse order

4

Read out fault memory with diagnostic system

Connect/disconnect diagnostic unit

AD00.00-D-2000-06TS

If faults exist.

Erase the fault memory.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Perform engine test run and check exhaust pressure sensor (2) for leaks

Visual inspection only.

Sensors, probes

Number

Designation

Engine 651 in model 910

BA07.04-N-1006-02TSR

Exhaust pressure sensor to exhaust gas recirculation pipe

Nm

25

Remove/install exhaust pressure sensor

129 589 00 91 00

Record plug

Referenced documents