Remove/install crankshaft position sensor

Type ar · topic 07.04 · version 0102 · 2002-09-24

Applies to: ENGINE 612.981 in MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741, WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741, WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) Country version "Canada" ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) Country version "USA" ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU9) Country version "Mexico"

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 903 (models 61*, 66*, 67*) · Series 904 (models 61*, 66*)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 903 (models 61*, 66*, 67*) · Series 904 (models 61*, 66*)

Also applies to engines/gearboxes: 612 981

AR07.04-D-0010NA

Remove/install crankshaft position sensor

15.1.01

ENGINE 612.981
in MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741,
WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741,
WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) Country version "Canada"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) Country version "USA"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU9) Country version "Mexico"

Remove/install crankshaft position sensor

D07.04-1117-05

1 Crankshaft position sensor

2 Connector

 	Remove, Install
1	Detach connector (2) at crankshaft position sensor (1)
2	Unscrew torx bolt and pull crankshaft position sensor (1) off the crankcase		*BA07.04-N-1001-01B
3	Install in the reverse order

 Sensors

Number	Designation		Engine 612.981


BA07.04-N-1001-01B	Bolt of crankshaft position sensor to crankcase	Nm	9