ar0704b0200evi

Remove/install rail pressure sensor

Type ar · topic 07.04 · version 0102 · 2018-06-08

Applies to: Engine 936.9 in model 382.155/189

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 382 (models 155, 189) · Series 936 (models 9**)

AR07.04-B-0200EVI

Remove/install rail pressure sensor

24.05.2018

Engine

936.9 in model 382.155/189

Remove/install rail pressure sensor

1	Support
2	Electrical connector
3	Common Rail
B622	Common rail pressure sensor

W07.04-1098-11

 	Remove/install
 Danger	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
 Danger	Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure	Keep all ignition sources out of hazard area. Do not carry out any work on system when it is pressurized.	AS07.16-Z-0001-01B
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-N-5000-01H
1	Open the engine compartment	 The access to perform maintenance and repair works varies according to the type / body manufacturer.
2	Remove acoustic capsules	 Installation: Install acoustic capsules only after leak tightness test.
3	Remove the support (1)	If available.
4	Clean the engine in the area of the Common Rail pressure sensor (B622)
5	Separate the electric connector (2)
6	Remove the Common Rail pressure sensor (B622) in the rail (3)	 Support the Common Rail (3) in the front parte of the flange with an open-end wrench.
		 Common rail pressure sensor	*BA07.16-B-1023-03EVI
		 Socket wrench bit	*001589650900
		 Torque wrench	*001589662100
7	Install in reverse order

 Common Rail Diesel Injection System

Number	Designation		ENGINE 936.9
BA07.16-B-1023-03EVI	Common rail pressure sensor	Nm	90

Remove/install rail pressure sensor

Remove/install rail pressure sensor

001 589 66 21 00

Torque wrench

001 589 65 09 00

Socket wrench bit

Referenced documents

ah0000n500001h Notes on avoiding damage through contamination and foreign objects
as0716z000101b Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure
as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.