ar0704b0010a

Remove/install crankshaft position sensor

Type ar · topic 07.04 · version 0100 · 2016-02-12

Applies to: Cumbustion engine 612 with Vehicle 979.013, 979.016

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.04 Sender, Feeler, Sensors — Series 979 (models 013, 016)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 979 (models 013, 016)

Also applies to engines/gearboxes: 612 ***

AR07.04-B-0010A

Remove/install crankshaft position sensor

12.02.16

Cumbustion engine 612 with Vehicle 979.013, 979.016

Remove/install crankshaft position sensor

D07.04-0005-05

1 Crankshaft position sensor

2 Connector

Remove and install

Danger!

Risk of injury due to being catched or smashed when tilting the cabin

During back and forth cab tilting, stay away from tilting area and take preventive measures to avoid non-authorized people from entering tilting area. Always tilt the cab to its final position and secure it with the safety device.

AS60.80-B-0001-01A

1.1

Tilt the cab.

For engines 612.983

AR60.80-B-0010D

1.2

Tilt the hood.

For engines 611.981/983

2

Remove the connector (2) from the crankshaft position sensor (1).

3

Unscrew the bolt and remove the crankshaft position sensor (1) from the engine block.

*BA07.04-B-1001-01A

4

Install in the reverse order.

Sensors

Número

Denominação

Engine 611.981/ 983

Engine 612.983

BA07.04-B-1001-01A

Crankshaft position sensor on the block

Nm

9

9

Referenced documents