ar0703s9105e

Remove/install leak oil line to injectors

Type ar · topic 07.03 · version 0100 · 2014-03-21

Applies to: MODEL 447 with ENGINE 651

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.03 Injection jets, Injection valves, Lines — Series 447 · Series 651

EinPAS 15 Engine › 15.45 Engine management › 15.45.13 Line/hose/valve — Series 447 · Series 651

AR07.03-S-9105E

Remove/install leak oil line to injectors

07.03.2014

MODEL

447 with ENGINE 651

Remove/install leak oil line to injectors

S07.03-4531-09

1

Leak oil line

3

Bracket

5

Rail

2

Cap

4

Lock

Danger !

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.
Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

Danger !

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Remove/install

1

Remove engine cover

AR01.10-S-2405E

2

Remove cap (2)

To do this unlock cap (2) and remove in direction of arrow.

3

Unclip bracket (3)

Installation: Check bracket (3), replace if necessary.

4

Remove leak oil line (1) from injectors

To do this unlock respective lock (4) and detach connection fitting for leak oil line (1). Collect escaping fuel and seal connections.

Installation: The respective connection fitting for the leak oil line (1) must engage audibly.

Record plug

*129589009100

5

Remove leak oil line (1)

To do this remove leak oil line (1) on rail (5). Seal connections.

Record plug

*129589009100

6

Install in the reverse order

Remove/install leak oil line to injectors

129 589 00 91 00

Record plug

Referenced documents