ar0703p6522tk

Remove and install injection valves

Type ar · topic 07.03 · version 0101 · 2006-05-23

Applies to: ENGINE 271.941 in MODELS 211.042 /242 ENGINE 271.956 in MODELS 211.041 /241

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.03 Injection jets, Injection valves, Lines — Series 211 (models 041, 042, 241, 242)

EinPAS 15 Engine › 15.45 Engine management › 15.45.42 Fuel distributor/rail/nozzle/injector — Series 211 (models 041, 042, 241, 242)

Also applies to engines/gearboxes: 271 941, 271 956

AR07.03-P-6522TK

Remove and install injection valves

12.5.06

ENGINE 271.941 in MODELS 211.042 /242

ENGINE 271.956 in MODELS 211.041 /241

Remove and install injection valves

P07.03-2072-08

1 Fuel distributor

2 Retaining clamp

Y62 Fuel injection valves

3 Anti-twist lock

 	Remove/install
Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel.	No fire, sparks, naked flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel	AS47.00-Z-0001-01A
1	Remove fuel distributor (1) together with the fuel injectors (Y62)		AR07.03-P-1450TK
2	Unplug retaining clamps (2) on fuel injectors (Y62)	 Installation: Ensure correct seating of retaining clip (2) on anti-twist locks (3) and in the grooves on the fuel injection valve (Y62) (arrow).
3	Pull fuel injectors (Y62) off the fuel distributor (1)
4	Install in the reverse order

Referenced documents

ar0703p1450tk Remove fuel distributor with injection valves
as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.