Remove/install fuel distributor with injectors · ar0703p1450gf · Mercedes-Benz WIS

AR07.03-P-1450GF

Remove/install fuel distributor with injectors

17.9.96

ENGINE 166.940 /960 /990 /995 in MODEL 168

P07.50-0277-12

1 Fuel line

2 Hose clamp

3 Fuel rail

4 Torx bolt

5 Sealing ring

6 Connector for injector

Y62 Injector

 	Remove/install
1	Remove air cleaner	 Model 168 up to 28.2.01	AR09.10-P-1050GF
		 Model 168 as of 1.3.01	AR09.10-L-1050VB
2	Expose the electrical wire for the injectors (Y62) and detach connectors (6)	 Installation: Replace tie straps. Observe layout of wires
Danger!	Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.	No fire, sparks, naked flames, or smoking. Pour fuels only into suitable and properly marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
3	Remove fuel line (1) on the fuel distributor (3) and plug with suitable stopper	 Check the condition of the hose clamp (2); replace if necessary.
4	Unscrew torx bolts (4) and pull fuel distributor (3) with injectors (Y62) out of the intake manifold	 Replace  sealing rings (5) on the injectors (Y62); lubricate slightly for easier assembly	*BA09.20-P-1001-01E
5	Installation in reverse order

 Intake manifold, intake manifold preheating

Number	Identification		Engine 166.940/ 960/990/ 995


BA09.20-P-1001-01E	Bolt, intake manifold to cylinder head	Nm	15

ar0910l1050vb Remove/install air filter
ar0910p1050gf Remove air cleaner, install
as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.