ar0703d9105sd

Remove/install leak oil line to injectors

Type ar · topic 07.03 · version 0102 · 2010-06-17

Applies to: ENGINES 646.984 /985 /986 in MODEL 906

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.03 Injection jets, Injection valves, Lines — Series 646 (models 984, 985, 986) · Series 906

EinPAS 15 Engine › 15.45 Engine management › 15.45.13 Line/hose/valve — Series 646 (models 984, 985, 986) · Series 906

AR07.03-D-9105SD

Remove/install leak oil line to injectors

16.6.10

ENGINES 646.984 /985 /986 in MODEL 906

Remove/install leak oil line to injectors

D07.03-1114-06

1 Leak oil line

2 Lock

3 Fuel return line fitting

Remove/install

Danger!

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.

Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove trim panel of cylinder head cover

AR01.20-D-5015SD

2

Unlock locks (2) upwards using a suitable tool

3

Detach the leak oil line (1)

Installation: Replace sealing rings.

4

Lead out leak oil line (1) under the injection lines

5

Loosen leak oil line (1) from mountings and detach from fuel return line fitting (3)

6

Remove leak oil line (1)

Installation: Check leak oil line (1); replace if necessary.

7

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Conduct engine test run, stop engine and check fuel system in the area of leak oil line (1)

Referenced documents