ar0510d760102us

Rivet timing chain

Type ar · topic 05.10 · version 0100 · 2007-08-17

Applies to: ENGINE 272.979 in MODEL 906

Where it sits

Function group 1 Engine › 05 Engine timing › 05.10 Timing chain drive, toothed belt drive — Series 906

EinPAS 15 Engine › 15.17 Engine timing › 15.17.34 Chain drive/toothed belt/gearwheel drive — Series 906

Also applies to engines/gearboxes: 272 979

AR05.10-D-7601-02US

Rivet timing chain

Timing chain drive

Number

Designation

Engine
272.979
in model
906

BA05.10-N-1003-01H

Bolt for timing chain rivet element (reference value)

Nm

32

Rivet timing chain
Rivet timing chain
Rivet timing chain
Rivet timing chain

272 589 00 39 00

Assembly inserts

Riveting tool

Case

Assembly inserts

602 589 00 98 00

272 589 00 63 00

271 589 01 63 00

Rivet timing chain

Guide

272 589 01 63 00

Rivet timing chain

P05.10-2229-01

Cover timing case shaft against falling parts and remove fallen down parts immediately.

1 Place assembly insert (F11) in the rivet press tool (01) and fix in place with the mounting screw.

2 Place assembly insert (D12) in the rivet press tool (01).

Rivet timing chain

P05.10-2230-01

3 Insert riveted link (1), centering fork (03) and pressing seat plate (2) in the ends of the timing chain (4) while pressing the bolts of the centering fork (03) into the bores of the pressing seat plate (2) and centering the pressing seat plate (2).

Insert riveted link (1) from the rear.

Rivet timing chain

P05.10-2231-01

4 Screw in thrust spindle (02) on rivet press tool (01) and press in rivet link (1) all the way into the pressing seat plate (2). Remove centering fork (03).

Ensure that rivet link (1) is flush with the rivet press tool (01) and the rivet link bolts (1) are led into the bores on the pressing seat plate (2).

5 Remove pressure screw (02) and rivet press tool (01).

Rivet timing chain

P05.10-2232-01

6 Place assembly insert (F4) in rivet press tool (01) and fix in place with a mounting screw.

7 Place assembly insert (D3) in the rivet press tool (01).

Rivet timing chain

P05.10-2233-01

8 Place outer plate (3) into magnetic assembly insert (D3).

Rivet timing chain

P05.10-2234-01

9 Place rivet press tool (01) in such away that the spacer bushing of the assembly insert (F4) lies on the roll of the timing chain (4).

Ensure that riveted link and outer plate are aligned.

10 Screw in pressure screw (02) on rivet press tool (01) until there is firm resistance.

When turning the thrust spindle (02), ensure that the pins of the riveted link move into the holes of the outer plate.

11 Remove trust screw (02) and rivet press tool (01).

Rivet timing chain

P05.10-2235-01

12 Turn over assembly insert (D3) to the riveting section (arrow).

Rivet timing chain

P05.10-2236-01

13 Place rivet press tool (01) in the middle on a rivet link bolt.

The rivet link bolts are riveted one after the other.

14 Tighten thrust spindle (02) on rivet press tool (01).

15 Detach pressure screw (02) and rivet press tool (01).

Rivet timing chain

P05.10-2237-01

16 Inspect riveting (arrows), re-rivet if necessary.