ar0500p2011pi

Remove/install hydraulic valve clearance compensation elements

Type ar · topic 05.00 · version 0101 · 2005-04-06

Applies to: ENGINE 642 in MODEL 203, 209

Where it sits

Function group 1 Engine › 05 Engine timing › 05.00 General — Series 203 · Series 209

EinPAS 15 Engine › 15.17 Engine timing › 15.17.30 Valve train — Series 203 · Series 209

Also applies to engines/gearboxes: 642 ***

AR05.00-P-2011PI

Remove/install hydraulic valve clearance compensation elements

24.6.04

ENGINE 642 in MODEL 203, 209

Remove/install hydraulic valve clearance compensation elements

P05.00-2059-11

1 compensation element

2 Clamp

3 Roller drag lever

Remove/Install

1

Remove camshafts

AR05.20-P-6992PI

2

Remove compensation element (1)

Do not use a magnet. The slide surfaces of the compensation element (1) and the roller of the roller drag lever (3) would be magnetized. This can cause minute iron chips to accumulate, which in turn can damage the compensation element (1) and the cam.

Installation: Reinstall the compensation elements (1) that are not replaced at the same position.

3

Remove roller drag lever (3)

4

Slacken compensation element (1) from roller drag lever (3)

Pry off clamp (2) by hand.

5

Install in the reverse order

Referenced documents