ar0500p2011gd

Remove/install hydraulic valve clearance compensation elements

Type ar · topic 05.00 · version 0103 · 2003-03-13

Applies to: ENGINE 668.940 /941 /942 in MODEL 168 ENGINE 668.914 in MODEL 414.700

Where it sits

Function group 1 Engine › 05 Engine timing › 05.00 General — Series 168 · Series 414 (models 700) · Series 668 (models 914, 940, 941, 942)

EinPAS 15 Engine › 15.17 Engine timing › 15.17.30 Valve train — Series 168 · Series 414 (models 700) · Series 668 (models 914, 940, 941, 942)

AR05.00-P-2011GD

Remove/install hydraulic valve clearance compensation elements

20.5.97

ENGINE 668.940 /941 /942 in MODEL 168

ENGINE 668.914 in MODEL 414.700

Remove/install hydraulic valve clearance compensation elements

P05.00-0273-05

1 Hydraulic valve clearance compensation element

2 Drag lever

Remove/install

1

Remove camshafts

Model 168

AR05.20-P-6992GD

Model 414.600/700

AR05.20-L-6992VA

2

Take off drag levers (2)

Re-install drag lever (2) at the same position.

3

Pull hydraulic valve clearance compensation elements (1) out of the cylinder head

Do not disassemble hydraulic valve clearance compensation element (1).

Installation: Re-install hydraulic valve clearance compensation element (1) at the same position.

4

Install in the reverse order

Referenced documents