ar0500p2011fb

Removing/installing hydraulic valve clearance compensation elements

Type ar · topic 05.00 · version 0100 · 2005-06-28

Applies to: ENGINE 122.9 in MODEL 454.0

Where it sits

Function group 1 Engine › 05 Engine timing › 05.00 General — Series 454 (models 0**)

EinPAS 15 Engine › 15.17 Engine timing › 15.17.30 Valve train — Series 454 (models 0**)

Also applies to engines/gearboxes: 122 9**

AR05.00-P-2011FB

Removing/installing hydraulic valve clearance compensation elements

13.4.05

ENGINE 122.9 in MODEL 454.0

Removing/installing hydraulic valve clearance compensation elements

P05.00-2074-06

1 Hydraulic valve play compensating elements

Removing/installing

1

Remove rocker arm for intake camshaft or exhaust camshaft

AR05.20-P-2340FB

2

Remove hydraulic valve clearance compensation elements (1) out of the cylinder head

Do not dismantle hydraulic valve clearance compensation element (1) since it could be cause irreparable damage in the process.

Mark hydraulic valve clearance compensation elements (1) appropriately which should be re-used and install again at the same position.

3

Install in reverse order

Referenced documents