ar0330s5000ef
Remove/install retaining lock for crankshaft/ring gear
Type ar · topic 03.30 · version 0100 · 2014-08-27
Applies to: MODEL 447 with ENGINE 622
Where it sits
Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 447 · Series 622
EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 447 · Series 622
AR03.30-S-5000EF
| Remove/install retaining lock for crankshaft/ring gear
| 08.08.2014
|
MODEL
| 447 with ENGINE 622
|
1
| Retaining lock
|
2
| Screw/bolt
|
| Remove
|
|
|
1
| Remove transmission
|
| AR26.10-S-0020EF
|
| Install
|
|
|
2
| Insert retaining lock (1)
| If necessary turn engine at the crankshaft in direction of rotation until the teeth match.
|
|
|
|
| Retaining lock
| *607589014000
|
3
| Fasten retaining lock (1)
| To do this use screw/bolt (2) with the nut.
|
|
| Remove
|
|
|
4
| Remove retaining lock (1)
| Retaining lock
| *607589014000
|
| Install
|
|
|
5
| Install transmission
|
| AR26.10-S-0020EF
|
Referenced documents
