ar0330s5000cb

Remove/install retaining lock for crankshaft/ring gear

Type ar · topic 03.30 · version 0101 · 2018-11-05

Applies to: Model 415 with engine 200

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 415

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 415

Also applies to engines/gearboxes: 200 ***

AR03.30-S-5000CB

Remove/install retaining lock for crankshaft/ring gear

17.10.2018

Model

415 with engine 200

Remove/install retaining lock for crankshaft/ring gear

1

Retaining lock

2

Screw

S03.30-4515-05

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove

1

Remove transmission.


Model 415 with engine 200 with transmission 700.720

AR26.10-S-0020CB

Install

2

Insert the retaining lock (1).

Retaining lock

*607589014000

If necessary,

turn the engine in the direction of rotation using the crankshaft until the gearing matches.

3

Secure the retaining lock (1).

To do this, secure the screw (2) with a suitable nut.

Remove

4

Remove retaining lock (1).

To do this, remove screw (2).

Retaining lock

*607589014000

Install

5

Install transmission.


Model 415 with engine 200 with transmission 700.720

AR26.10-S-0020CB

Remove/install retaining lock for crankshaft/ring gear

607 589 01 40 00

Retaining lock

Referenced documents