ar0330s5000c

Remove/install retaining lock for crankshaft / ring gear

Type ar · topic 03.30 · version 0200 · 2007-04-30

Applies to: ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW) ENGINE 611.980 in MODEL 638.094 /194 /294 with CODE (MQ4) Engine OM611 DE22 LA (75kW) with CODE (MQ5) Engine OM611 DE22 LA (90kW)

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 611 (models 980) · Series 638 (models 094, 194, 294)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 611 (models 980) · Series 638 (models 094, 194, 294)

AR03.30-S-5000C

Remove/install retaining lock for crankshaft / ring gear

18.4.07

ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75kW)
with CODE (MQ5) Engine OM611 DE22 LA (90kW)

Remove/install retaining lock for crankshaft / ring gear

D03.30-0008-05

1 Retaining lock

2 Starter

Modification notes

6.3.07

Method completely changed

Operation steps 1 to 3

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove starter (2)

Do not remove electrical lines on starter (2).

AR15.30-S-7100C

2

Insert retaining lock (1) at starter opening in the starter ring gear

If necessary turn engine in its direction of rotation at crankshaft until the toothing engages, see:

Rotate engine at crankshaft

AR01.00-S-0120D

Retaining lock

*602589004000

3

Install in the reverse order

Remove/install retaining lock for crankshaft / ring gear

602 589 00 40 00

Retaining lock

Referenced documents