AR03.30-P-5000TY | Removing/installing the retaining lock for crankshaft / ring gear | 14.2.12 |
ENGINE 113.967 in MODEL 219.375
ENGINE 113.990 in MODEL 219.376
P03.30-2089-05
1 Retaining lock
| Removing/installing | ||
Danger! | Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between the four pillars of the hoist and position the four support plates at the hoist mounting points specified by the vehicle manufacturer. | |
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Keep all body parts and limbs away from moving mechanical components. | |
1 | Switch ignition off, remove ignition key (transmitter key). | On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove the Keyless Go transmitter card or transmitter key from the vehicle and store beyond the reach of the transmitter (at least 2 m). | |
Danger! | Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and safety glasses. Only pour battery acid into suitable and appropriately marked containers. | |
2 | Disconnect ground cable from battery | Insulate clamping device of the ground line in order to prevent inadvertent contact with the ground point of the battery. | |
| Notes on battery | All models | |
3 | Raise vehicle with lifting platform | ||
4 | Remove starter | ||
5 | Insert retaining lock (1) into starter opening | Slide the retaining lock into the starter opening (see arrow) and allow to latch into the ring gear. If required, continue turning the engine at the center Bolt for the crankshaft in the direction of rotation of the engine. | |
Retaining lock | |||
6 | Install in reverse order |
Retaining lock
112 589 03 40 00
Referenced documents
- ah5410p000101a
- ah5410p000101a Notes on battery
- ar0060p1000tx Lift/jack up vehicle
- ar1530p7100ty Removing and installing the starter
- ar5410p0003tx Disconnect/connect battery ground line
- as0000z000901a Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of