ar0330p5000m

Remove/install retaining lock for crankshaft / ring gear

Type ar · topic 03.30 · version 0103 · 2003-07-15

Applies to: ENGINE 628.960 in MODEL 220.028 /128 ENGINE 628.962 in MODEL 463.309 /332 /333 ENGINE 628.963 in MODEL 163.128 ENGINE 628.961 in MODEL 211.028

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 163 (models 128) · Series 211 (models 028) · Series 220 (models 028, 128) · Series 463 (models 309, 332, 333) · Series 628 (models 960, 961, 962, 963)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 163 (models 128) · Series 211 (models 028) · Series 220 (models 028, 128) · Series 463 (models 309, 332, 333) · Series 628 (models 960, 961, 962, 963)

AR03.30-P-5000M

Remove/install retaining lock for crankshaft / ring gear

2.2.00

ENGINE 628.960 in MODEL 220.028 /128

ENGINE 628.962 in MODEL 463.309 /332 /333

ENGINE 628.963 in MODEL 163.128

ENGINE 628.961 in MODEL 211.028

Remove/install retaining lock for crankshaft / ring gear

P03.30-2022-04

1 Retaining lock

2 Crankcase retaining lock

Remove/install

1

Remove transmission

The retaining lock (1) for the starter ring gear can only be inserted when the transmission is removed.

Model 220

AR27.10-P-0500I

Model 463

AR27.10-P-0500GA

Model Series 163

AR27.10-P-0500GH

Model 211.028

2

Mount retaining lock (1) onto crankcase (2)

*628589004000

3

Install in the reverse order

Remove/install retaining lock for crankshaft / ring gear

Retaining lock

628 589 00 40 00

Referenced documents