ar0330p5000cw

Remove/install retaining lock for crankshaft/ring gear

Type ar · topic 03.30 · version 0103 · 2011-05-24

Applies to: ENGINES 271 in MODEL 172, 204, 207, 212

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 172 · Series 204 · Series 207 · Series 212

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 172 · Series 204 · Series 207 · Series 212

Also applies to engines/gearboxes: 271 ***

AR03.30-P-5000CW

Remove/install retaining lock for crankshaft/ring gear

16.5.11

ENGINES 271 in MODEL 172, 204, 207, 212

Remove/install retaining lock for crankshaft/ring gear
Remove/install retaining lock for crankshaft/ring gear

P15.30-2042-01

M1 Starter

1 Retaining lock

P03.30-2020-01

Installing, removing

1

Remove starter (M1)

AR15.30-P-7100CW

2

Insert retaining lock (1)

Push retaining lock (1) into starter opening and allow to engage in starter ring gear; turn engine at crankshaft of necessary.

Engine 271.8: Grind off retaining lock (1) at the edges in order to avoid tipping during insertion.

*001589650900

*602589004000

3

Remove in the reverse order

Remove/install retaining lock for crankshaft/ring gear
Remove/install retaining lock for crankshaft/ring gear

602 589 00 40 00

Retaining lock

Wrench socket

001 589 65 09 00

Referenced documents