Remove/install retaining lock for crankshaft/ring gear

Type ar · topic 03.30 · version 0105 · 2012-08-23

Applies to: ENGINE 651 in MODEL 166, 172, 204, 207, 212, 218, 221

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

AR03.30-P-5000CD

Remove/install retaining lock for crankshaft/ring gear

1.8.12

ENGINE

651 in MODEL 166, 172, 204, 207, 212, 218, 221

1	Retaining lock

P03.30-2151-01

 	Remove/install
1	Remove starter	ENGINE 651 in MODEL 166, 172, 204, 207, 212 (except 212.098/298), 218, 221	AR15.30-P-7100CD
		ENGINE 651.9 in MODEL 212.098/298	AR15.30-P-7100EH
2	Insert retaining lock (1) into starter opening	 If necessary turn engine at the belt pulley/vibration damper in direction of engine rotation until the  retaining lock (1) engages in the starter ring gear.
		 Retaining lock	*651589024000
3	Install in the reverse order

651 589 02 40 00

Retaining lock