ar0330d5000we

Remove/install retaining lock for crankshaft/ring gear

Type ar · topic 03.30 · version 0102 · 2011-06-06

Applies to: ENGINES 651 in MODEL 900 ENGINES 651.955 /956 /957 in MODEL 906

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 651 · Series 900 · Series 906

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 651 · Series 900 · Series 906

AR03.30-D-5000WE

Remove/install retaining lock for crankshaft/ring gear

23.5.11

ENGINES 651 in MODEL 900

ENGINES 651.955 /956 /957 in MODEL 906

Remove/install retaining lock for crankshaft/ring gear

D03.30-1135-12

1 Retaining lock

Installing, removing

1.1

Remove starter from engine and place to one side with attached electrical lines

For vehicles without code (MJ7) ECO Start

AR15.30-D-7100WE

1.2

Remove starter

For vehicles with code (MJ7) ECO Start

AR15.30-D-7100WE

2

Insert retaining lock (1) into starter opening

Retaining lock

*651589024000

3

Remove in the reverse order

Remove/install retaining lock for crankshaft/ring gear

Retaining lock

651 589 02 40 00

Referenced documents