ar0330d5000d

Remove/install retaining lock for crankshaft / ring gear

Type ar · topic 03.30 · version 0102 · 2001-10-29

Applies to: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

Also applies to engines/gearboxes: 612 981

AR03.30-D-5000D

Remove/install retaining lock for crankshaft / ring gear

6.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

Remove/install retaining lock for crankshaft / ring gear

D03.30-0008-05

Retaining lock at starter opening

1 Retaining lock

2 Starter

Fig. item, etc.

Work instructions

2

Starter

Detach at transmission and place to the side with cables connected

AR15.30-D-7100E

1

Retaining lock

Push into starter opening and allow to engage in ring gear, rotate engine at crankshaft, if necessary

*602589004000

Remove/install retaining lock for crankshaft / ring gear

Retaining lock

602 589 00 40 00

Referenced documents